Panasonic Smoke Alarm 6362 User Manual

Fire alarm system

Rope elevator kit 6362

•

A kit with all the necessary pieces for a rope elevator.

General

6362 is a kit to make a rope elevator for a

detector and its base, e.g. detector 3304 and

analog base 3312.

Product applications

The rope elevator is used with any of the

Panasonic heat or smoke detectors plugged

in a base, allowing the user to access a

detector mounted on a high ceiling height, in

order to perform a test, maintenance, replace

the detector, etc.

The kit

The kit consists of the following:

•

Protective cover for detector (6360)

Cleat (to fix the rope & hang it up;

not shown in the figure above)

20 m rope (Ø2 mm polyester)

Metal plate

Two screws (to fix the base)

Two loop screws (for the rope)

Two wood screws (to fix the cleat)

Connection box (five screw term.)

Cable clamp (for the conn. box)

Rope clamp (to fix the rope)

Cable clamp (to fix the cable)

•

Panasonic Electric Works Fire & Security Technology Europe AB

Citadellsvägen 23, SE-211 18 Malmö, Sweden

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99